WHAT IS THE EFT - ETHANOL FUEL TUNER?
The EFT is a plug
and play product. This means that your
original ECU engine harness will not be damaged.
The EFT plugs in-between your injector and your injector
clip, making it possible to complete the basic installation in less than 30
minutes, depending on the number of engine covers you need to remove. Once
installed, the EFT will allow you to run any ethanol mixture or blend (flex
fuel) in your fuel tank. The EFT works in harmony with the original ECU to
provide an accurate ethanol fuel mixture. Simply by flipping a switch, you can
toggle between a leaner or richer ethanol fuel mixtures.
The EFT is available in three different configurations,
namely for:
4 Cylinder Engines
6 Cylinder Engines, and
8 Cylinder Engines
Each of the above engine configurations includes a set of
injector clips to suit your vehicle’s injectors. You will need to choose from a list of the
most popular injector clips available.
In its basic configuration, the EFT does not require any PC
software. The EFT has already been configured for you in our factory. In this
state, the EFT will provide perfect ethanol control. There are a few other options available for
purchase, which include: Software (with its accessories) and Extended Warranty
(with Re-Flash).
The EFT is packaged as a Kit, which contains all the items you
will need to install this wonderful product. The Kit includes:
1 x Injector Harness
(select type of Injector clip from list of options)
1 x EFT Piggy Back Controller
1 x Temperature Sensor
DIFFERENT OPTIONS FOR THE EFT
- A choice of: 4, 6 or 8 cylinders with either short
or long injector harnesses
- A choice of: BOSCH, DENSO and a range of other popular
injector connectors
- TUNING: RS232 tuning cable, Tuning harness, CD: PC
Software and tuning guide
- RE-FLASH: CD, Re-Flash Guide
FEATURES OF THE EFT
- 2 Complete Map sets (A/B), switch activated
- Each Map set consists of a two dimensional Fuel map
and a Temperature side map
- Each Fuel map has 16 x 24 sites, entry in percent
fuel change
- Each Temperature map has 24 sites, entry in percent
fuel change
- Option to shorten or lengthen the injector pulse
- Cold start assistance provided for Ethanol
operations
- Supplied Engine Temperature Sensor
- Operating Temperature –20 to 75DegC
- RS232 Interface for Tuning
- No Tuning required for Ethanol Flex Fuel Operation
- Easy to install, correct injector clips can be
ordered
- Very Low Power Consumption
- Unit is encapsulated to protect against moisture
- Re-Flash Option
- Drives 10-16 Ohm injectors
- For 3, 4, 5, 6, 8 cylinder engines
(Use 4-cyl Harness for 3 cyl engines and 6-cyl Harness for 5 cyl engines)
- Use two units for more cylinders than eight
- Recognizes Connected Cylinders
HOW DO I PURCHASE THE INCREDIBLE EFT?
Connect to our online store - ddsDirect.
The EFT is only available for
purchasing via ddsDirect.
Register now and make your purchase online
to benefit from this amazing product!
BUY NOW WITH ddsDIRECT!

QUICK LINKS:
Terms and Conditions l Privacy Policy
Perfect Power and its associates disclaim all liability for any loss, damage, injury or expense however caused, arising from the use of or reliance upon, in any manner, the information provided through this service.
Copyright © 2006 Digital Data Systems (Pty) Ltd.
Please feel free to contact us at info@perfectpower.com with any queries,
suggestions, web problems etc. which you may have |