Perfect Power PRS - Pro Race System

You are here > Products > Stand Alone > PRS

PRO (PRO-RACE SYSTEM)

The PRS is a full stand-alone fuel injection and ignition management system which employs the latest technology and is packed with features.

The PRS system consists of two different hardware configurations and two software options and tuning software in Windows or DOS. The two PRS versions are:

PRS 4	The economical system with reduced outputs for 4 cylinders.
PRS 2	The same hardware as PRS 4.

The PRS replaces the MIC3 and the ECU, which are being retained for the time being.

PRS

The PRS system has evolved from the original I-Chip, and the SMT BIKE, with all the MIC3 features thrown in. It is a very powerful system and it will be the platform for all further standalone engine management systems.

The PRS system is offered as a product to end-users with full tuning and installation support. For OEM's and RACING TEAMS a 'design' package is available with a start-up kit, training, source code, etc. Contact info@perfectpower.com for details.

2 built in ignition drivers for up to 15A each, ideal for wasted spark applications
2 Injection drivers for up to 5A each
AMP (MAP) input for normal aspirated and boost applications
Engine and AIR temperature sensing inputs
Narrow band LAMBDA input
Boost and Rev counter direct drive outputs
Crank and CAM trigger inputs
Fuel pump relay drive

The top of the range engine management system with the following features:

	2 maps, each 765 sites.
	In 4, 6, 8 cylinders applications
	Up to 10 000 rpm at 8 cylinders
	8 built-in injector drivers up to 6A
	Idle control and driver for a 2 wire idle motor
	CAM switching and driver
	Fuel pump activation
	Lambda close loop control
	Throttle and rpm calibration: chose your own sites
	Temperature and manifold pressure calibration to any external device
	Retards and advances from a base point
	Easy to tune
	Wasted spark on normal ignition>
	2 trigger inputs, level settable, polarity adjustment
	Boost control or fan control
	RPM and boost fuel limit
	Max boost and rpm recording
	Alarm output
	Turbo lag compensation option
	Fuel pressure adjustment
	Acoustic warning
	DOS and Windows tuning

Assignable Functions:

	Water pump activation and set point.
	Extra boost injection activation.
	Fan control output
	Boost control output
	2/3 wire idle motor output
	Nitrous Activation
	Camm switching output

We have recently completed an Installation Guide for the PRS which we hope will assist you with your installations. Click here to view the guide. Should you wish to download the guide, right click the link above and click "Save target as" which will allow you to save the document to disk.

Many thanks to Bob Ida who installed a PRS2 unit and sent his installation tips to us. Click here to read the information.

Many thanks to Per Mai - Denmark who has installed many PRS units successfully. Here are his installation tips. Click here to read the information.

Terms and Conditions l Privacy Policy

Perfect Power and its associates disclaim all liability for any loss, damage, injury or expense however caused, arising from the use of or reliance upon, in any manner, the information provided through this service.

Copyright © 2006 Digital Data Systems (Pty) Ltd.

Please feel free to contact us at info@perfectpower.com with any queries,
suggestions, web problems etc. which you may have