The XMS4 (Xtreme Management System - 4th Generation) stand-alone product range,
consists of twelve fully comprehensive stand-alone engine management
systems. You will be able to choose from three groups - A, B and C and
each group offers four different modules.
The XMS4 C Group consists of four different modules, of the
top-of-the-range of XMS4 products. They are ideally suited for 4 to 8 cylinder
engines with "fly-by-wire" ETC (Electronic Throttle Control), and are available with:
- 4 to 8 x 2Amp Direct
Injector Drivers
- 4 to 8 x Ignition
Signal Outputs
- 8 x Setpoint Outputs
- Wide Band LSU-4
Controller
- ETC Controller
The XMS4 C Group product range comes with a maximum of
8 x 2Amp injector drives, and up to 8
ignition signal outputs.
The range offers the BEST "Features for Cost"
in terms of performance. The XMS4C can be Sequential or Batch, depending on the installed
hardware and the availability of a CAM trigger input. The XMS4C offers idle
control through the ETC, as well as a settable ETC operating algorithm. Launch control
(with ETC or without) is standard.
Like all other modules in the XMS4 range, the XMS4C has a soft or hard fuel
cut and 16 different Setpoint options, which can be logically combined. This
allows the setting of "Shift-Points" and the control of other tasks in the
engine bay. The XMS4C range includes ALL the features of the other groups (XMS4 A and XMS4B),
but includes an
ETC controller with simple "straight-line" traction control.
The XMS4C also has an on-board data logger for
64000 samples with up to 1ms recording speed! The data logging can even be externally
triggered.
As per the other XMS4 A and B groups, all XMS4C modules boast the awesome LETRIPP SOFTWARE features, such as;
remote master map switching, extensive setpoint control, and many PC screen display options.
All modules have the 2.0 USB interface for quick tuning.
If the "Rolls-Royce" version of the all NEW XMS 4th Generation
is what you need - look no further than the XMS4C product range!
To view a DEMO Version of the NEW LetRipp Software
Click Here Now!
SUMMARY OF FEATURES - XMS4 C GROUP
- 4 to 8 x 2Amp Direct Injector Drivers
- 4 to 8 x Ignition Signal Outputs
- Sequential ignition and injection for 4 to 8 cylinders
- 8 x Setpoint Outputs
- Built-in Wide Band
Lambda circuit for the Bosch LSU4
- On-board MAP (AMP) Sensor (on some modules)
- ETC (Electronic
Throttle Control) Controller
- High Speed USB 2.0
Communication, Real Time
- Separate CRANK (CB1) and CAM (CB2) Inputs
- Partial or Complete Closed Loop Lambda Operation
- +5 Volt Output to power: Manifold Pressure, Temperature Sensors, TPS, etc.
- Electronic Boost Control
- Each Setpoint has a High/Low Limit
- Each Setpoint can be AND/OR to ONE other Setpoint
- Automatically Switch Maps via Setpoint Condition
- Two-Layer Fault and Condition Indication: Group and Items
- Seamless Map Switching while you Drive
- All Inputs can be Calibrated to suit the Factory Sensors
- A Tuned Value will have an immediate effect (Live)
- Important Software Features:
- LetRipp Software - User Friendly from DIY to Professional Tuner
- Has 2 Complete Maps of EVERYTHING
- Large Tuning Maps 16 x 24
- Instantly Saves tuning changes
For more details about LetRipp Software and Hardware, please visit
The LetRipp Technology page.
MODULES - XMS4 C GROUP
The XMS4 C Group is made up of 4 (Four) different modules, namely;
XMS4C-4, XMS4C-4A, XMS4C-8 and XMS4C-8A
XMS4C-4
- 4 x Injector Drivers
- 4 x Ignition Outputs
- 8 x Setpoint Outputs
- Wide Band Lambda Control
- ETC Control
- USB Communication
- Interpolation in Tuning
- Perfect Power LetRipp Windows Tuning Software
XMS4C-4A
- 4 x Injector Drivers
- 4 x Ignition Outputs
- 8 x Setpoint Outputs
- On-board AMP (MAP)
Sensor (up to 3AMP)
- Wide Band Lambda Control
- ETC Control
- USB Communication
- Interpolation in Tuning
- Perfect Power LetRipp Windows Tuning Software
XMS4C-8
- 8 x Injector Drivers
- 8 x Ignition Outputs
- 8 x Setpoint Outputs
- Wide Band Lambda Control
- ETC Control
- USB Communication
- Interpolation in Tuning
- Perfect Power LetRipp Windows Tuning Software
XMS4C-8A
- 8 x Injector Drivers
- 8 x Ignition Outputs
- 8 x Setpoint Outputs
- On-board AMP (MAP)
Sensor (up to 3AMP)
- Wide Band Lambda Control
- USB Communication
- ETC Control
- Interpolation in Tuning
- Perfect Power LetRipp Windows Tuning Software
CLICK HERE TO ORDER YOUR XMS4C MODULE, TODAY!
CLICK HERE TO VIEW OUR PRICE LIST!
Terms and Conditions l Privacy Policy
Perfect Power and its associates disclaim all liability for any loss, damage, injury or expense however caused, arising from the use of or reliance upon, in any manner, the information provided through this service.
Copyright © 2006 Digital Data Systems (Pty) Ltd.
Please feel free to contact us at info@perfectpower.com with any queries,
suggestions, web problems etc. which you may have |
XMS4 C GROUP
