OPEL-VAUXHALL

Return to Home > Wire Diagram Index > SMT7 > OPEL-VAUXHALL


(123) Perfect Power Wiring Diagram for a SMT7 - Fuel

Vehicle Model: Omega-A 2.6 (C26NE) - Both Year: 1989 - 1991
Trigger Type: 60-2 Last Changed Date: 2/24/2006 3:28:00 PM
Tips / Notes: Published Date: 9/16/2011 11:15:30 AM

ECU Connector Information

ECU Manufacture: BOSCH MOTRONIC - M1.5

No. of Pins:

55

No. of Connectors:

1
ECU Location: BEHIND RIGHT HEADLIGHT REFERENCE DRIVER SEAT

No. of Rows:

3
Description: BOSCH MOTRONIC 1.5

Features:

3 ROW CONNECTOR 55 PINS SHAPED LIKE A T
  BOSCH MOTRONIC - M1.5 ECU connector of a OPEL-VAUXHALL Model model, showing the piggy back chip connections

Wiring Connections for Fuel

 

BOSCH MOTRONIC - M1.5 ECU in a OPEL-VAUXHALL - Omega-A 2.6 (C26NE) - Both connecting to a Perfect Power SMT7 diagram Electrical connection Crank + diagram 5 ECU 48 Engine SMT 2-18 Crank + SMT 4-18 BOSCH MOTRONIC - M1.5 ECU in a OPEL-VAUXHALL - Omega-A 2.6 (C26NE) - Both connecting to a Perfect Power SMT7 diagram Electrical connection TPS signal diagram ECU 53 3 Engine TPS signal SMT 6-18 BOSCH MOTRONIC - M1.5 ECU in a OPEL-VAUXHALL - Omega-A 2.6 (C26NE) - Both connecting to a Perfect Power SMT7 diagram Electrical connection Crank Sgnd diagram ECU 2 6 Engine Crank Sgnd SMT 3-18 BOSCH MOTRONIC - M1.5 ECU in a OPEL-VAUXHALL - Omega-A 2.6 (C26NE) - Both connecting to a Perfect Power SMT7 diagram Electrical connection MAS signal diagram 4 ECU 7 Engine SMT 8-18 MAS signal SMT 1-16 BOSCH MOTRONIC - M1.5 ECU in a OPEL-VAUXHALL - Omega-A 2.6 (C26NE) - Both connecting to a Perfect Power SMT7 diagram Electrical connection Ground diagram ECU 2 2 Engine Ground SMT 1-18 Black BOSCH MOTRONIC - M1.5 ECU in a OPEL-VAUXHALL - Omega-A 2.6 (C26NE) - Both connecting to a Perfect Power SMT7 diagram Electrical connection Power diagram ECU 27 1 Engine Power SMT 10-18 Red
Follow the above wiring diagram in sequence to get the best reliable, trouble free, installation for the SMT7 chip. First connect the power to the piggy back chip, which are normally the first two connections. Then tackle each connection in turn, start the engine and attempt some tuning to establish the validity of your connection. Should there be a fault, simply roll back your last connection. Most of our piggy back chips have a shorting plug which allows you to remove the chip from the car and return the installation to standard.

This particular wiring diagram is for fuel modification. If you are looking for improved fuel consumption and maybe improved performance, then this is the best place to start. If you have installed a K&N filter or changed your exchaust, then you will need a Perfect Power piggy back chip to get the most out of your engine. This electrical wiring diagram easily connects our SMT7 into your ECU wiring loom with a few simple steps.

Follow us on YouTube where there are examples of past installations. Join our Facebook page where we constantly have competitions and give away prizes as well answering your general questions.

 
 
 
 
 
 
 

Copyright 2011 : Digital Data Systems Pty LTD
Digital Data Systems is the holding company for Perfectpower.com

By viewing this wiring diagram, you have accepted the END USER LICENCE AGREEMENT (EULA)") and are bound by those terms and conditions. As a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only.  Digital Data Systems will not be held responsible in any way for incorrect wiring information contained. Information in this document, including Internet Web Site references, is subject to change without notice. This wiring diagram was downloaded from the www.perfectpower.com web site, where it forms part of an extensive library, over 1500 wiring diagrams.
For more information or assistance, please email info@perfectpower.com with WIRING DIAGRAMS in the subject.