SMART TUNER SMT6 - RESETTING THE UNIT

Perfect Power Application Notes.

 

Application Note : AN 3.12

NOTE : RESETTING THE UNIT WILL RESULT IN THE MAP BEING DELETED.

 

STEP 1 : Disconnect the power and communication cable from the unit.

STEP 2 : Open the SMT6 Windows Software.

 

SMT6 Windows Tuning Software

 

 

STEP 3 : As the software opens, activate the "offline" option.

STEP 4 : Allows the software to load the "default map"

 

SMT6 Piggy-Back Unit - Loading Default Map

 

STEP 6 : Reconnect power and communication to the SMT6 unit.

STEP 7 : Left click and hold on the "RPM" heading above the RPM table.

 

SMT6 Piggy-Back Unit - Software 2D Maps

 

 

After about 5 seconds this warning message will be displayed.

 

 

SMT6 Piggy-Back Unit - Resetting The Unit

 

 

After selecting the "Yes" option the SMT6 will have the memory cleared and the factory default map loaded.

 

 

SMT6 Piggy-Back Unit - Clearing The SMT6

 

The SMT6 unit has been reset.

 

SMT6 Piggy-Back Unit - Uploading Data

 

If the reset has been successful then the unit will automatically go online.