SMART TUNER SMT8 - HALL EFFECT APPLICATION

Perfect Power Application Notes.

 

Application Note : AN 1.8

Introduction

The SMT8 is primarily designed to work with sine wave signals and specific wiring of a hall-effect signal must be followed.

Purpose

To wire the SMT8's negative crank input for moderate or high RPM applications.

Wiring

Option 1
For normal operation up to +- 6000 RPM.
SMT8 Piggy-Back Unit - Wiring for normal operation up to 6000 RPM
Option 2
For operation above 6000 RPM
SMT8 Piggy-Back Unit - Wiring for operation above 6000 RPM
Note : High level trigger must be set to "ON".
SMT8 Piggy-Back Unit - ShiftF2 - System Definition

Conclusion

The SMT8 can now function correctly with a hall-effect signal.