XMS4 - SINGLE COIL, SEQUENTIAL INJECTION APPLICATION

Perfect Power Application Notes.

 

Application Note - AN 8

This note shows the complete wiring for the XMS4A, XMS4B and XMS4C units when they are wired in to an engine with a single coil but sequential injection is required. Setting up the unit to enable the sequential mode is explained in another application note.

 

XMS4A-4A

4 Cylinder, Single Coil (with distributor), Sequential Injection
XMS4 Stand Alone Unit - 4 Cylinder, Single Coil (with distributor), Sequential Injection

 

 

XMS4B-4A

4 cylinder, Single Coil (with distributor), Sequential Injection

 

 

XMS4 Stand Alone Unit - 4 Cylinder, Single Coil (with Distributor), Sequential Injection

 

 

XMS4B-8A

6 cylinder, Single Coil (with distributor), Sequential Injection


XMS4 Stand Alone Unit - 6 Cylinder, Single Coil (with Distributor), Sequential Injection



XMS4C-4A

4 cylinder, Single Coil (with distributor), Sequential Injection
XMS4 Stand Alone Unit - 4 Cylinder, Single Coil (with Distributor), Sequential Injection
 

XMS4C-8A

8 cylinder, Single Coil (with distributor), Sequential Injection
XMS4 Stand Alone Unit - 8 Cylinder, Single Coil (with Distributor), Sequential Injection