Perfect Power Online Manuals.


Support for your FT20 Unit.


The Red LED shows whether all injectors are connected incorrectly. It actually monitors the time between any two following injections and compares it to the time of the previous two injections. In other words, it checks for REGULAR  injection outputs. Irregular outputs are indicated when one injector is wrong phased, or not connected.


By connecting ONE injector harness only (any injector) the input and output time  MUST be regular, and the RED LED must be "OFF".


If acceleration causes extra injector activation (acceleration enrichment), then the RED LED may flash.


In batch injection, it is also possible that the RED LED may flash as well.