SMT8_4 TECHNICAL MANUAL

Perfect Power Online Manuals.

 

Support for your SMT8 V4 Unit.

APPLICATION NOTES

 

 

HALL EFFECT SENSOR APPLICATION

Introduction
The SMT8 is primarily designed to work with sine wave signals and specific wiring of a hall-effect signal must be followed.


Purpose
To wire the SMT8’s negative crank input for moderate or high RPM applications.

 


Wiring


Option 1
For normal operation up to ±6000 RPM

 

SMT8V4 Piggy-Back Unit - Wiring for normal operation up to 6000 RPM

Option 2
For operation above 6000 RPM

SMT8V4 Piggy-Back Unit - Wiring for operation above 6000 RPM

Note: High level trigger must be set to ‘ON’

 

SMT8V4 Piggy-Back Unit - ShiftF2 - System Definition

CONCLUSION


The SMT8 can now function correctly with a hall-effect signal.